MEFO-BOX - Clamping lid

With the clamping lid, individual parts and bulk material can be fixed in MEFO-BOXes in mesh width 12 mm of all series. Individual parts have to be covered with an inserting bottom (modified with pressure rods), bulk material baskets can be directly locked with the clamping lid for up to two baskets per base area. If more than 2 baskets per base area are used, an additional inserting bottom (modified with pressure rods) must be used in order to distribute the clamping force of the rollers evenly on all bulk material baskets. Individual parts or bulk material baskets can be quickly and easily clamped the two dead centre tilt levers. The maximum load capacity of the clamping lid is 80 kg. In the Mefo-Box a height of 74 mm is required for the clamping lid.

MEFO-BOX Standard series

Part No.     suitable for MEFO-BOXes with outside dimension (L2 x B2)
MF4090/12     371 x 221...
MF4091/12     471 x 321...
MF4092/12     521 x 321...
MF4093/12     651 x 471... as well as 659 x 479...

All dimensions in mm (if not otherwise specified)

MEFO-BOX Euro series

Part No.     suitable for MEFO-BOXes with outside dimension (L2 x B2)
MF4191/12     408 x 308...
MF4192/12     608 x 408...

All dimensions in mm (if not otherwise specified)

MEFO-BOX Special series

Part No.     suitable for MEFO-BOXes with outside dimension (L2 x B2)
MF4291/12     396 x 396...

All dimensions in mm (if not otherwise specified)

Download Brochure

For further details and technical specifications please refer to the
MEFO-BOX Brochure (PDF 6 MB)